Close the Bypass Tray, if necessary, and then power on the machine. Tighten the two locking screws rotate to the right.Ĭlose the cover. Hold the assembly by the two handles and then reinsert it into the machine. Grasp the Fuser Assembly by the two handles and pull it straight out of the machine. When the Fuser has cooled, remove the Fuser Assembly by rotating the orange screws on each side of the assembly to the left until they are completely loosened. Wait until the Fuser Assembly is cold enough to remove safely. Lift up on the release lever on the Top Left Cover A to open the cover. Open the Bypass Tray Paper Tray 5located on the left side of the printer, by rotating it outward. See the Related Content for additional Information. Place the assembly on a minimum of 10 sheets of paper. Damage to a work surface may result if a hot Fuser Assembly is removed and positioned on an unprotected surface. Avoid any contact with internal parts of the cartridge. Use the lifting handles on each end to avoid any contact with hot surfaces during removal or replacement.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |